+91- 22 2850 4010
+91- 22 2850 4010
• Integration in CNC-guiding systems or other mechanical guiding equipment
• Digital display of cutting current with set point pre-adjustment, display for operating readiness, plasma arc “ON” and cumulative error
• Stepless adjustment of cutting current
• Emergency stop button
• CNC-Interface (X102)
• Remote control FB 1
| Mains voltage | 3 x 400 V, 50 Hz | |||||||||
| Max. Connecting load | 16.6 kVA | |||||||||
| Fuse, slow | 25 A | |||||||||
| Cutting current | 20 – 100 A | |||||||||
| Duty cycle | 100 % | |||||||||
Cutting Range
|
|
|||||||||
| Plasma gas | Air | |||||||||
| Dimensions (L x W x H) | 710 x 280 x 590 mm | |||||||||
| Weight | 50 kg |
• New consumables
• High cutting speeds
• Swirl gas Technology
• Safe piercing performance
• Increased lifetime of consumables
• Electrical height sensing contact**
• Piercing up to 20 mm**
• Fine cutting from 3 mm
• Bevel cutting up to 30°y
• Marking with 20 A
| mm | A | Quality mm/min | Maximum mm/min |
| 2 | 45 | 4.200 | 6.000 |
| 3 | 45 | 2.800 | 3.500 |
| 4 | 45 | 1.900 | 2.300 |
| 4 | 65 | 4.400 | 5.500 |
| 6 | 65 | 2.850 | 3.700 |
| 10 | 65 | 1.100 | 2.000 |
| 8 | 100 | 3.000 | 4.00 |
| 10 | 100 | 2.400 | 3.350 |
| 15 | 100 | 1.200 | 1.800 |
| 20 | 100 | 750 | 1.100 |
| 25 | 100 | 500 | 700 |
| 30 | 100 | 200 | 520 |
